Loading ...
-
Welding #flux #welding #sheet #metal Medical supplies, laser welded forming, beautiful appearance, firm, flat welding seam, no welding rod, and flux welding sheet metal is needed. As a professional welding and metal fabrication company, ETCN also... moreWelding #flux #welding #sheet #metal Medical supplies, laser welded forming, beautiful appearance, firm, flat welding seam, no welding rod, and flux welding sheet metal is needed. As a professional welding and metal fabrication company, ETCN also provides our clients with weldable plastic sheet: welding copper sheet, welding thin stainless steel sheets, PVC sheet, tubesheet or thin sheet welding services.
https://www.etcnbusiness.com/machining-service/welding/ less
-
fluxes for magnesium alloy
#magnesium #flux
Magnesium alloy has a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when overheated. When in a melting state without any flux, it can be... morefluxes for magnesium alloy
#magnesium #flux
Magnesium alloy has a low melting point and small heat capacity. When heated in the air, it gets oxidized fast, and it is easy to burn when overheated. When in a melting state without any flux, it can be burned violently. Therefore, the magnesium alloy must always be in flux or protective atmosphere during the casting process. The quality of molten casting depends greatly on the quality of the flux and the melt protection.
Jinzhou Sata Fused Fluxes and New Materials Factory (SATA for short), is a professional master alloy manufacturer. We provide grain refiner for aluminium, magnesium flux and etc. Want to know more? Please contact us.
https://www.sata-fluxes.com/product/mg--mg-alloy-flux/ less
-
raw materials for aluminium foundry
#Flux #coating #material
Flux coating material refers to the material which can separate metal from mineral by forming a low melting point slag layer while interacting with the rocks and harmful impurities in the... moreraw materials for aluminium foundry
#Flux #coating #material
Flux coating material refers to the material which can separate metal from mineral by forming a low melting point slag layer while interacting with the rocks and harmful impurities in the orehe. According to the properties of flux, it can be divided into alkaline flux (such as limestone, dolomite, etc.), acid flux (such as quartz, metal ore with high silicone element, etc.), Neutral flux (bauxite, bauxite, etc.) and flux (such as fluorite, cryolite, etc.). It is generally required to have highly effective components, low harmful impurities. And ore strength and block degree should meet the requirements of the smelting process. Flux has the stable chemical composition, good selectivity, quick reaction, safe use, low corrosion and low price.
https://www.sata-fluxes.com/product/raw-materials/ less
-
Sodium free refining flux
#refining #flux
General Description:
Aluminum alloys containing more than 2 % magnesium become brittle with sodium.
Feature: This flux is a compact covering and cleaning granulated flux to remove the sodium in the aluminum... moreSodium free refining flux
#refining #flux
General Description:
Aluminum alloys containing more than 2 % magnesium become brittle with sodium.
Feature: This flux is a compact covering and cleaning granulated flux to remove the sodium in the aluminum melting. It generates low dust and low fume during application. It reacts quickly with molten aluminum and removes the alkali metal (Ca, Na, Li, Sr) and non-metallic inclusions (oxides, carbides, borides) and degassing.
Function:
1. Do not contain various forms of Na, which is suitable for Mg2% al-alloy to avoid “sodium brittle”
2. The main components are Chloride and Fluoride salts with other salts and compounds.
3. The dry raw materials are mixed together and then are fused or melted into a liquid state by usIng a high temperature furnace.
After fusing completed the flux are cooled and they are crushed or ground into ccustomerized particle size.
http://www.sata-fluxes.com/product/alal-alloy-flux/sodium-free-refining-flux/ less
-
Powder Refining Flux
#aluminium #flux #powder
Powder Refining Flux (SATA-PF-330)
General Description of Powder Refining Flux (SATA-PF-330)
For aluminium alloys, since the Al has strong chemical activity, the inclusions and gases are easily generated... morePowder Refining Flux
#aluminium #flux #powder
Powder Refining Flux (SATA-PF-330)
General Description of Powder Refining Flux (SATA-PF-330)
For aluminium alloys, since the Al has strong chemical activity, the inclusions and gases are easily generated during the smelting process, and they are distributed inside the alloy after solidification of the melt, which will reduce the alloy’s quality, It is necessary of removing the oxide inclusion, enhance the casting quality and avoid defects in the casting.
SATA-refining flux used for removing non-metallic inclusions from aluminium molten, it also will form a layer that efficiently prevents the aluminium molten from reacting with generating hydrogen pick-up and oxides from the air.
There are two options: One is general refining flux with emission. Another one is fewer fumes during working.
http://www.sata-fluxes.com/product/alal-alloy-flux/powder-refining-flux.html less
-
Granulated fused refining fluxes
#Granular #Flux
General Introduction:
SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, calcium, lithium) and... moreGranulated fused refining fluxes
#Granular #Flux
General Introduction:
SATA granulated fused refining flux is a eutectic salt composed of mgcl2 anhydrous and potassium or sodium chloride. Which can removes alkali metal(sodium, calcium, lithium) and non-metallic inclusions (oxides, borides and carbides) from liquid aluminium and al-alloys. It’s in-furnace metal treatment flux.
The main chemical compositions of different fluxes based on Mgcl2 anhydrous, Kcl, Nacl, CaF2, Na3ALF6, K3ALF6 and etc. These raw materials are fused in a furnace to a high temperature, cooled and crushed. Compare to the powder mixed. Fused fluxes have a single sharp melting point rather than mixed powder flux has a melting range. The melting point belows 483℃. And some are free from fluorides, sodium, which is suitable for high magnesium al-alloy.
http://www.sata-fluxes.com/product/alal-alloy-flux/granulated-fused-refining-fluxes/ less
-
Drossing Flux
#drossing #flux #for #aluminum
Drossing Flux (SATA-PF-310)
Description of Drossing Flux (SATA-PF-310)
SATA drossing flux is specially developed for removing the slag from the aluminium melt before or after refining procedure. It is for... moreDrossing Flux
#drossing #flux #for #aluminum
Drossing Flux (SATA-PF-310)
Description of Drossing Flux (SATA-PF-310)
SATA drossing flux is specially developed for removing the slag from the aluminium melt before or after refining procedure. It is for in- furnace use. The slag after treatment is dry ,loose, easy to be removed.
Apperance: White or gray white in powder
Application temperature: 700-780 ℃
a)More choice for your option,
b)1. Sodium-free drossing flux which suitable for High magnesium al-alloy.
c)2. Eco-friendly drossing flux with less emission
Advantage of Drossing Flux (SATA-PF-310)
Mild Exothermic flux; separate the aluminium with the dross. Decomposition of alumina in slag, to make the slag dry and loose, easy for removing.
Enhance the aluminium melt purity, improve the alloy properties greatly, and reduce metal loss.
https://www.sata-fluxes.com/product/alal-alloy-flux/drossing-flux.html less
-
Degassing Flux
#aluminum #degassing #flux
Degassing Flux (SATA-PF-350)
General Description of Degassing Flux (SATA-PF-350)
Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual... moreDegassing Flux
#aluminum #degassing #flux
Degassing Flux (SATA-PF-350)
General Description of Degassing Flux (SATA-PF-350)
Practice has proved that the hydrogen is the main cause of the pores in the aluminium alloy, the pores not only reduce the actual cross-sectional area of the casting, but also the source of the crack, so it is important part that removing the hydrogen during the smelting process.
SATA-degassing flux is a kind of traditional high efficiency degassing flux for aluminium and its alloys, it used for removing hydrogen and oxides from the aluminium melting.
Application of Degassing Flux (SATA-PF-350)
Plunge suitable quantity flux to the bottom (100mm from the bottom is better) of the melt, evenly and slowly remove the lunch, make the flux fully react with aluminium molten, stand or stir the molten for 10-15 min, the hydrogen and oxide will be taken out of aluminium molten.
http://www.sata-fluxes.com/product/alal-alloy-flux/degassing-flux.html less
-
Cover Flux
#cover #flux #for #aluminium
General Description of Cover Flux (SATA-PF-340)
The aluminium melt is extremely easy oxidation and inhale when it is in melting. A flux is required to have low melting, low density, good humidity, and can form a... moreCover Flux
#cover #flux #for #aluminium
General Description of Cover Flux (SATA-PF-340)
The aluminium melt is extremely easy oxidation and inhale when it is in melting. A flux is required to have low melting, low density, good humidity, and can form a dense uniform protective film, which we called it cover flux.
SATA-cover flux is used for covering of molten aluminium, it can form a cover layer on the surface of molten for prevent the molten aluminium react to oxidation.
Application of Cover Flux (SATA-PF-340)
Use Instruction: it can added at one time before refining or it can added in two batches,first add half cover flux to the molten aluminium and stir the melt and make the flux fully react to molten, then skimming the dross and spread the balance on the surface of the aluminium molten.
Advantage of Cover Flux (SATA-PF-340)
It can prevent the aluminium molten react with oxygen in the air.
http://www.sata-fluxes.com/product/alal-alloy-flux/cover-flux.html less
Loading ...
There are no more results to show.