Loading ...
-
Fig 600 Hammer Union6
Working Pressure:
6,000psi(414 bar)
Features:
Bronze seat provides primary seal;will not rust in water services
Recommended Service:
Steam service, boiler connections, manifold, and line connections for production, drilling, and... moreFig 600 Hammer Union6
Working Pressure:
6,000psi(414 bar)
Features:
Bronze seat provides primary seal;will not rust in water services
Recommended Service:
Steam service, boiler connections, manifold, and line connections for production, drilling, and well servicing.
#Fig #600 #hammer #union #integrated #oilfield #supply #services #llc
https://www.rdpmc.com/fig-600-hammer-union.html less
-
Fig 400 Hammer Union
Working Pressure:
4,000psi(276 bar)through 4-inch sizes;
2,500psi(172 bar)through 5 to 12-inch sizes
Features:
21/2-through 12-inch sizes have O-rings for primary seal
Butt-weld available
Available for sour gas service: 2,500 psi... moreFig 400 Hammer Union
Working Pressure:
4,000psi(276 bar)through 4-inch sizes;
2,500psi(172 bar)through 5 to 12-inch sizes
Features:
21/2-through 12-inch sizes have O-rings for primary seal
Butt-weld available
Available for sour gas service: 2,500 psi suction, (172 bar) cold working pressure, 5-through 12-inch sizes; 4,000psi (276 bar) coldworking pressure, 1-through 4-inch sizes
Recommended Service:
Manifold and line connections,pump suction,and mud service.
#Fig #400 #hammer #union #national #oilfield #supply
https://www.rdpmc.com/fig-400-hammer-union.html less
-
Fig 2202 Hammer Union
Working Pressure:
15,000 psi(1034 bar)
Features:
Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E
Heat-treated components are 100% tested for hardness
Fluoroelastomer... moreFig 2202 Hammer Union
Working Pressure:
15,000 psi(1034 bar)
Features:
Meets National Association of Corrosion Engineers Standard MR-01-75 and American Petroleum Institute RP-14E
Heat-treated components are 100% tested for hardness
Fluoroelastomer seal rings
Butt-weld only
Stamped "sour gas" using low-stress dot stamping and painted with a green zinc-chromate primer to assure quick identification
Recommended Service:
Especially designed for sour gas service.
#Fig #2202 #hammer #union #oil #drilling #equipment #manufacturers
https://www.rdpmc.com/fig-2202-hammer-union.html less
-
Fig 207 Hammer Union
Working Pressure:
2,000 psi(138 bar)
Features:
Parts are interchangeable with Figs.200 and 206
O-ring on blanking cap ensures a leak-free seal
Raised lugs on cap allow for make-up with a hammer
Cap can be tapped for pressure... moreFig 207 Hammer Union
Working Pressure:
2,000 psi(138 bar)
Features:
Parts are interchangeable with Figs.200 and 206
O-ring on blanking cap ensures a leak-free seal
Raised lugs on cap allow for make-up with a hammer
Cap can be tapped for pressure gauge if specified
Available in butt-weld.
#Fig #207 #hammer #union #oil #drilling #equipment #suppliers
https://www.rdpmc.com/fig-207-hammer-union.html less
-
Fig 206 Hammer Union
Working Pressure:
2,000 psi(138 bar)
Features:
O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion
Replaceable O-ring extends union
1-to 10-inch sizes
Recommended Service:
Manifold and line... moreFig 206 Hammer Union
Working Pressure:
2,000 psi(138 bar)
Features:
O-ring in male sub improves sealing and protects metal-to-metal seal against corrosion
Replaceable O-ring extends union
1-to 10-inch sizes
Recommended Service:
Manifold and line connections, suction service, and corrosion service.
#Fig #206 #hammer #union #international #oilfield #supply
https://www.rdpmc.com/fig-206-hammer-union.html less
-
Fig 200 Hammer Union
Working Pressure:
2,000 psi(138 bar)
Features:
Economical,general-purpose union
1-to 4-inch sizes
Butt-weld available
Recommended Service:
General-service manifolds and lines.
#fig #200 #hammer #union #integrated #oilfield... moreFig 200 Hammer Union
Working Pressure:
2,000 psi(138 bar)
Features:
Economical,general-purpose union
1-to 4-inch sizes
Butt-weld available
Recommended Service:
General-service manifolds and lines.
#fig #200 #hammer #union #integrated #oilfield #supply #services #llc
https://www.rdpmc.com/fig-200-hammer-union.html less
-
Fig 100 Hammer Union
Working Pressure:
1,000 psi(69 bar)
Features:
Pressure-tight; make-up with hammer
Economical, low-pressure union
Recommended Service:
Manifold and line connections.
#Fig #100 #hammer #union #drilling #supply... moreFig 100 Hammer Union
Working Pressure:
1,000 psi(69 bar)
Features:
Pressure-tight; make-up with hammer
Economical, low-pressure union
Recommended Service:
Manifold and line connections.
#Fig #100 #hammer #union #drilling #supply #equipment
https://www.rdpmc.com/fig-100-hammer-union.html less
-
Fig 1002 Hammer Union
Working Pressure:
10,000psi (690 bar) through 4-inch sizes;
7,500 psi (517bar), 5-and 6-inch sizes
Features:
Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal,and minimizes flow... moreFig 1002 Hammer Union
Working Pressure:
10,000psi (690 bar) through 4-inch sizes;
7,500 psi (517bar), 5-and 6-inch sizes
Features:
Replaceable,lip-type seal provides primary seal,protects secondary metal-to-metal,and minimizes flow turbulence
Butt-weld available
Available for sour gas service:7,500 psi (517 bar)cold working pressure
5-and 6-inch sizes have O-rings for primary seals
Recommended Service:
Cementing, fracturing, acidizing, testing, and choke-and-kill lines.
#Fig #1002 #hammer #union #big #oilfield #companies
https://www.rdpmc.com/fig-1002-hammer-union.html less
Loading ...
There are no more results to show.
