Loading ...
-
Gate Valves
Gate valves acc. to DIN EN/ASME/API
Nom. Size Range: 1/2 "up to 48"
Nom. Pressure Range: Class 150 – 2500
Temperature range: -325 °F up to +1050 °F
Highlights of the Gate Valves
Design:
Solid, flexible wedge or double... moreGate Valves
Gate valves acc. to DIN EN/ASME/API
Nom. Size Range: 1/2 "up to 48"
Nom. Pressure Range: Class 150 – 2500
Temperature range: -325 °F up to +1050 °F
Highlights of the Gate Valves
Design:
Solid, flexible wedge or double disc
Rising stem OS&Y
Non-rising handwheel
Stuffing box, bellow sealed
Flange or butt welding ends
Materials acc. to DIN EN/ASTM:
Stainless steel
Cast steel
Heat-resisting steel
Cast steel for low temperatures
Special design, features and other materials on demand.
#flanged #gate #valve #manufacturers
https://www.geko-union.com/products/gate-valves.html less
-
MstnLand's series of New non-pin concentric butterfly valves can be widely used in the clean water system of municipal pipe network, water heating system, construction and other industries, which can not only quickly connect or cut off the medium, but... moreMstnLand's series of New non-pin concentric butterfly valves can be widely used in the clean water system of municipal pipe network, water heating system, construction and other industries, which can not only quickly connect or cut off the medium, but also quickly adjust the medium flow and can be used in noncorrosive medium pipeline or equipment, for closure, connection and flow regulation.
#flanged #butterfly #valve
https://www.mstnland.com/products/flange-center-line-butterfly-valves.html less
-
1. Choose 1/4-28 nut when receiving port is 1/4-28; Choose M6 nut when receiving port is M6.
2. Before flange the tubing, ensure the end of the tubing has a clean, square, burr-free cut. This is very important, as the square cut helps the tubing make... more1. Choose 1/4-28 nut when receiving port is 1/4-28; Choose M6 nut when receiving port is M6.
2. Before flange the tubing, ensure the end of the tubing has a clean, square, burr-free cut. This is very important, as the square cut helps the tubing make full contact with the bottom of the mating port. Neglecting to properly cut the tubing could lead to dead volume, resulting in peak distortion such as fronting, tailing or broadening.
3. Two-Piece Fittings Installation Steps:
a. Flange the tubing end with exclusive flange tool
b. Slide the nut, insert the assembly into the receiving port, pushing the tubing into the port until it bottoms out.
c. Finger tighten the nut into the port until snug.
#Flanged #Fittings
https://www.runzefluid.com/products/flanged-fittings.html less
Loading ...
There are no more results to show.
