Loading ...
-
Orcaboard will provide you the chance to get out on the water and enjoy some of Ireland's most beautiful scenery. #Stand #Up #Paddle #Board is an excellent peaceful way to explore the beauty of #Ireland and its natural wonders from the safety and comfort... moreOrcaboard will provide you the chance to get out on the water and enjoy some of Ireland's most beautiful scenery. #Stand #Up #Paddle #Board is an excellent peaceful way to explore the beauty of #Ireland and its natural wonders from the safety and comfort of a stand up paddle board. less
-
Rotary Paddle Level Switch
#rotary #paddle #level #switch #manufacturers
The rotary paddle level switch uses a micro motor as the driving device. The drive shaft is connected to the clutch. When the material is not in contact, the motor runs normally.... moreRotary Paddle Level Switch
#rotary #paddle #level #switch #manufacturers
The rotary paddle level switch uses a micro motor as the driving device. The drive shaft is connected to the clutch. When the material is not in contact, the motor runs normally. When the blade contacts the material, the motor stops rotating. The detection device outputs a Contact signal, at the same time cut off the power and stop rotating.
Working Principle of Rotary Paddle Level Switch
When the level drop detection blade is no longer blocked, the detection mechanism relies on the spring tension to restore the original state. First, a micro switch acts, turning on the motor power to make it rotate. Then another micro switch action sends out no material signal, as long as there is no material blocking the rotation of the monitoring blade, this state will continue.
After the AC micromotor is decelerated, the monitoring blade is rotated slowly. When the material level rises and the rotation of the blade are blocked, the detection mechanism generates a rotational displacement around the main shaft. This displacement first causes a micro switch to act, sending out a signal of material. Then another micro switch acts, cutting off the power of the micro motor to stop it from rotating. As long as the material level in the warehouse remains unchanged, this state will continue to be maintained.
Specification of Rotary Paddle Level Switch
We can manufacture according to customer's specification like:
Product Name Rotary paddle level switch
Material stainless steel 304, 316
Color black and red
Power supply 24VDC/220VAC
Process connection 2-1/2" x 5kg flange or others customized
Process temperature -20-80℃
Rod length 1m standard length or other customized
Installation vertical or horizontal mounted
Contact capacity SPDT 5A/250VAC
Blade Rotate Speed 1RPM
Torque 10kg/cm
Suitable Gravity ≥0.4g/cm3
Power 3W
Protect Grade IP65
Installing Rotary Paddle Level Switch
In the process of using the rotary paddle level switch, in order to achieve a safe and reliable effect, the following points need to be noted when installing the rotary resistance level switch:
Before installation, first confirm whether the model of the rotary resistance level switch meets the environmental requirements of the site, such as pressure, temperature, medium, etc., to ensure that the rotary resistance level switch can be used normally after installation.
Before installation, confirm that the power supply voltage is the same as the voltage marked on the nameplate.
According to the density of the measured medium, choose the best blade shape.
In order to ensure the safety of life and avoid damage to the rotary resistance level switch, because the wiring is disconnected.
During horizontal installation, the switch can be installed at an angle of 15-20 degrees horizontally to avoid the impact of the feed and try to avoid the feed port. less
The rotary paddle level switch works when there is no material blocking the rotation of monitoring blade, and several points need to be noted when installing it. Feejoy can manufacture rotary paddle switches according to your requirements.
-
The pulling type paddle mixer machine is mainly used for anti-cracking mortar, thermal insulation mortar, bonding mortar, plastering mortar, floor mortar and other dry powder mortars with high mixing uniformity and high-grade putty powder. Concrete... moreThe pulling type paddle mixer machine is mainly used for anti-cracking mortar, thermal insulation mortar, bonding mortar, plastering mortar, floor mortar and other dry powder mortars with high mixing uniformity and high-grade putty powder. Concrete admixtures, feeds, chemical powders, food flavors and other industries have also been greatly applied, and it is not suitable for the mixing of raw materials with a particularly large amount of spray and particularly large viscosity of materials.
Product Description of Pulling Type Paddle Mixer Machine
Pulling type paddle mixer machine is widely used for drying and mixing of dry powder mortar, chemical, pesticide, detergent, pigment food, monosodium glutamate, milk powder, salt, feed, chemicals, ceramics, plastics, rubber additives, and other powders.
Pulling type paddle mixer machine is also called a non-gravity door open type mixer. Based on the long-term practice in the field of mixers, the equipment overcomes the shortcomings of horizontal mixer cleaning and uses gear reduction gearbox and mixer rotor direct connection transmission for higher reliability and longer service life.
Structural Characteristics of Pulling Type Paddle Mixer Machine
The right end surface of the pulling type paddle mixer machine body is provided with a non-drive endplate, the left end is provided with a drive endplate, the lower end of the drive end plate is disposed inside the track, and the motor reducer and the rotor shaft are respectively provided with two, the left end of the rotor shaft and the output end of the motor reducer is connected and connected, and the rotor shaft is assembled inside the mixer body through the driving endplate. The rotor shaft is symmetrically arranged inside the mixer body, the blade is assembled on the rotor shaft, and the track is arranged on the lower side of the mixer body. The lower end opens a discharge door, and a shaft seal is arranged at a connection between the rotor shaft and the output end of the motor reducer.
The Pulling type paddle mixer machine is a new high-efficiency material mixer independently developed and designed by the Neil mechanical design team based on the twin-blade gravity-free mixer. This model maintains the advantages of the previous generation double-mix mixer. On the basis of the design of the side-opening door, the cleaning efficiency and mixing speed are greatly improved, the mixing time is shortened, and the production efficiency is greatly improved.
Application of Pulling Type Paddle Mixer
Dry mortar
Chemicals, chemicals, detergents,
Feed, pesticides,
Pigment food, monosodium glutamate, milk powder, salt
Ceramic, plastic, rubber additives
Main Features of Pulling Type Paddle Mixer
(1) Easy to clean, side-opening door design makes machine cleaning more convenient and saves production time
(2) The rotation speed of the shaft driven by the reducer and the structure of the blade will weaken the gravity of the material. With the lack of gravity, the difference in particle size and a specific gravity of each material is neglected during the mixing process.
(3) The intense mixing movement shortens the mixing time, which is faster and more efficient.
(4) Even if the material has a difference in specific gravity and particle size, a good mixing effect can be achieved under the rapid and vigorous tumbling of the staggered stirring blades.
Technical Data of Pulling Type Paddle Mixer
Technical Data
Model no. Effective Vol Loading ratio Power Speed Dimension (mm) Weight
NCL-300 300L 0.6-0.8 4KW 53r/min 3240X1035X1430 580kg
NCL-500 500L 0.6-0.8 7.5KW 53r/min 3390X1160X1480 860kg
NCL-1000 1000L 0.6-0.8 11KW 45r/min 3590X1380X1630 1530kg
NCL-1500 1500L 0.6-0.8 15KW 45r/min 3880X1550X1810 1980kg
NCL-2000 2000L 0.6-0.8 18.5KW 39r/min 4180X1780X1930 2590kg
NCL-3000 3000L 0.6-0.8 22KW 31r/min 4430X1910X2040 3620kg
Power supply AC 3 Phase 208-415V 50/60HZ
Our company provides paddle type mixer,horizontal powder mixer,paddle mixer design,horizontal paddle mixer,paddle mixers for sale and bulk powder transport,RFQ today.
#paddle #mixers #for #sale
https://www.nielmachinery.com/products/pulling-type-paddle-mixer.html less
Loading ...
There are no more results to show.
