Loading ...
-
Find Differential Pressure Transmitter
Looking for a differential pressure transmitter? MicroSensor is here to help you. MicroSensor is a supplier of pressure transmitters, flow sensors, and pressure sensors for different industries. We provide a wide... moreFind Differential Pressure Transmitter
Looking for a differential pressure transmitter? MicroSensor is here to help you. MicroSensor is a supplier of pressure transmitters, flow sensors, and pressure sensors for different industries. We provide a wide range of products which are highly suitable for various applications and can be used individually or in combination to meet your specific requirement. Visit - https://www.microsensorcorp.com/Product_Differential-Pressure-Transmitter.html />
#Differential #Pressure #Transmitter less
-
Two Wire
#isolated #two #wire #transmitter
Mornsun two-wire isolation amplifiers are voltage input and two-wire current output loop power collection signal conditioning modules. The module powering the front-end equipment through the back-stage... moreTwo Wire
#isolated #two #wire #transmitter
Mornsun two-wire isolation amplifiers are voltage input and two-wire current output loop power collection signal conditioning modules. The module powering the front-end equipment through the back-stage current loop collection mode and transmitting the voltage to an industry standard isolated 3.7-22mA output current.
https://www.mornsun-power.com/html/products/60/two-wire.html less
-
Syscom 421S
1 receiver x maximum 4 transmitters | 1800ft transmission distance | 0.07s ultra-low latency | 4 pairs of SDI and HDMI outputs on the receiver | Supports RS-422 and RS-485 connections | Supports wireless tally feature |Auto channel scan on... moreSyscom 421S
1 receiver x maximum 4 transmitters | 1800ft transmission distance | 0.07s ultra-low latency | 4 pairs of SDI and HDMI outputs on the receiver | Supports RS-422 and RS-485 connections | Supports wireless tally feature |Auto channel scan on receiver
#wireless #sdi #video #transmitter
https://www.hollyland-tech.com/syscom-series.html less
-
Cosmo C1
HEVO solution | Embedded UVC for direct livestream | Ultra-low latency (40ms) | 5.1~5.8GHZ | HDMI&SDI | 1,000ft range | 1080P60FPS full HD | Multiple power options
#long #range #video #transmitter #and #receiver
... moreCosmo C1
HEVO solution | Embedded UVC for direct livestream | Ultra-low latency (40ms) | 5.1~5.8GHZ | HDMI&SDI | 1,000ft range | 1080P60FPS full HD | Multiple power options
#long #range #video #transmitter #and #receiver
https://www.hollyland-tech.com/como-series.html less
-
MAKE FORCE SENSORS SAFER AND SMARTER
TB3S Weighing Transmitter
1. Precision die-casting aluminum shell, surface spraying treatment.
2. Suitable for occasions with high precision and poor environment.
3. Sampling frequency: 10Hz.
4. With RS232 or RS485... moreMAKE FORCE SENSORS SAFER AND SMARTER
TB3S Weighing Transmitter
1. Precision die-casting aluminum shell, surface spraying treatment.
2. Suitable for occasions with high precision and poor environment.
3. Sampling frequency: 10Hz.
4. With RS232 or RS485 communication function.
5. Output of two relays (both on and off).
6. Acoustic alarm and light prompt using buzzer and LED.
7. Adopt anti-interference power supply design technology.
8. Voltage analog output with the function of short circuit protection.
9. Wiring terminal block and aviation socket, housing with mounting holes.
10. Use two buttons for output adjustment, no potentiometer and other analog adjusting parts.
#wireless #load #cell #transmitter
https://www.tgloadcells.com/products/tb3s-weighing-transmitter/ less
-
Density transmitter can be used to monitor the density of gas in the sealed container, and offer kinds of solutions such as supporting new substation and intelligent transformation of existing substation.
#density #transmitter ... moreDensity transmitter can be used to monitor the density of gas in the sealed container, and offer kinds of solutions such as supporting new substation and intelligent transformation of existing substation.
#density #transmitter https://www.lansoinstruments.com/products/density-transmitter/ less
-
The CZWB series is an intelligent temperature transmitter designed specifically for industrial complexity. This product is mainly installed in the head of the temperature sensor, the sensor is upgraded to an integrated temperature transmitter, to achieve... moreThe CZWB series is an intelligent temperature transmitter designed specifically for industrial complexity. This product is mainly installed in the head of the temperature sensor, the sensor is upgraded to an integrated temperature transmitter, to achieve the temperature of the field display and data transmission. https://www.chenzhuisolator.com/products/czwb-series-temperature-transmitter/ #2 #wire #temperature #transmitter less
-
Product Description
Model 168 series intrinsically safe pressure transducers are low range differential pressure transducers and transmitters with NEMA 4 (IP-65) rated aluminum enclosures. They are very rugged and very reliable, good for many industrial... moreProduct Description
Model 168 series intrinsically safe pressure transducers are low range differential pressure transducers and transmitters with NEMA 4 (IP-65) rated aluminum enclosures. They are very rugged and very reliable, good for many industrial applications.
The pressure range covers from 0.1″WC to 100″WC, unidirectional or bidirectional. The output can be 3-wire 0 to 5V, 0 to 10V, or 2-wire 4 to 20 mA, fully protected against short circuit and incorrect wiring. In the voltage version, the output can go down to true zero. The units are temperature compensated. The accuracy can be 0.6%, 0.4% or 0.25% at room temperature.
The patented stainless steel intrinsically safe pressure sensor provides good corrosion resistance, excellent performance and long term stability.
Our unique production setup can also make special pressure range (e.g. -0.5″WC to +3.5″WC) to meet special applications.
Key Features of Alpha 168 intrinsically safe pressure transducer:
Up to 15 PSI Proof Pressure on all Ranges
Miswiring Full Protection
Unsymmetrical Bidirectional Pressure Ranges
True Zero Output for Voltage Unit
Key Features of Alpha 168 intrinsically safe pressure transducer:
Accuracy: ±0.25%, ±0.40% or ±0.60% of span
Differential Pressure Ranges:
Unidirectional: 0.10 in.W.C. to 100.00 in.W.C.
Bidirectional: ±0.10 in.W.C. to ±50.00 in.W.C.
NEMA 4/IP65; Die-cast aluminum
Mounting: surface mount
Output signal: current or voltage
Process Applications of Alpha 168 intrinsically safe pressure sensor:
HVAC and VAV Control
Clean Room and Isolation Rooms
Duct Static Pressure Measurement
Draft Control and Fume Hood Control
Furnace Air Flow Control
Power Plant Air Flow Monitor and Control
#hvac #differential #pressure #transmitter
https://www.alphainstruments.com/product/model-168-differential-pressure-transmitter/ less
-
Product Description
The Model 164 Series pressure sensor ranges vary from 0.1 in w.c. to 100 in w.c. unidirectional and 0.05 in w.c. to 50 in w.c. bidirectional. Wiring time is reduced with the removeable terminal block. Each unit is fully protected... moreProduct Description
The Model 164 Series pressure sensor ranges vary from 0.1 in w.c. to 100 in w.c. unidirectional and 0.05 in w.c. to 50 in w.c. bidirectional. Wiring time is reduced with the removeable terminal block. Each unit is fully protected against short circuiting and incorrect wiring.
The Model 164 Series stainless steel pressure sensor are available for pressure range from 0.1″WC full scale to 100″WC full scale, Both unidirectional and bidirectional pressure ranges are offered.
The output of the Model 164 Stainless Steel Pressure Transducer is available in two versions: 0 to 5VDC and 0 to 10VDC, where 0VDC is true zero without offset. The output of Model 164 Stainless Steel Pressure Transmitters is 4 to 20 mA. All units are temperature compensated.
The patented variable capacitance pressure sensor is constructed by stainless steel and glass, no glue or other organics. That provides excellent performance, corrosion resistance and long-term stability.
Additionally, our unique production setup allows us to accommodate special orders for nonstandard pressure ranges (e.g. -0.5″WC to +3.5″WC).
Key Features of Alpha 164 stainless steel pressure sensor:
Up to 15 PSI Proof Pressure on all Ranges
Miswiring Full Protection
Unsymmetrical Bidirectional Pressure Ranges
True Zero Output for Voltage Unit
Specification of Alpha 164 stainless steel pressure transducer:
Accuracy: ±0.25%, ±0.40% or ±0.60% of span
Differential Pressure Ranges:
Unidirectional: 0.10 in.W.C. to 100.00 in.W.C.
Bidirectional: ±0.10 in.W.C. to ±50.00 in.W.C.
NEMA 1; ABS enclosure
Mounting: surface mount
Output signal: current or voltage
Process Applications of Alpha 164 stainless steel pressure transmitter:
HVAC and VAV Control
Clean Room and Isolation Rooms
Duct Static Pressure Measurement
Draft Control and Fume Hood Control
Furnace Air Flow Control
Power Plant Air Flow Monitor and Control
#stainless #steel #pressure #transmitter
https://www.alphainstruments.com/product/model-164-differential-pressure-transmitter/ less
-
Vibration Fork Level Switch
#tuning #fork #level #transmitter
The vibration fork level switch is also often referred to a tuning fork level meter or a tuning fork level controller, mainly because the tuning fork level meter appears in different links... moreVibration Fork Level Switch
#tuning #fork #level #transmitter
The vibration fork level switch is also often referred to a tuning fork level meter or a tuning fork level controller, mainly because the tuning fork level meter appears in different links in industrial production, and the actual critical role is different. The tuning fork level switch is a kind of level switch, which mainly uses the tuning fork resonance principle to measure the level status. Its unique fork design and its inherent vibration characteristics can ensure the automatic removal function.
Advantages of Vibration Fork Level Switch
The tuning fork level switch has the characteristics of long service life, stable performance, safety and reliability, strong adaptability, no adjustment and no maintenance, and is mainly used in metallurgy, building materials, chemical industry, light industry, food and other process control industries.
It is not affected by foam, vortex and gas, and is suitable for fixed-point alarm or control of solid material level in various silos and liquid levels in various containers.
Features of Vibration Fork Level Switch
Strong adaptability: The different electrical parameters and density of the tested liquid have no influence on the measurement. Harsh conditions such as scaling, agitation, turbulence, bubbles, vibration, medium viscosity, high temperature, and high pressure have no effect on the detection.
Maintenance-free: Since the detection process of the tuning fork limit switch is completed by an electronic circuit, there are no moving parts, so once installed and put into operation, no maintenance is required.
No adjustment required: Since the detection of the tuning fork limit switch is not affected by the electrical parameters and density of the measured medium, no on-site adjustment is required regardless of the measured liquid.
Specification of Vibration Fork Level Switch
We can manufacture according to customer's specification like:
Product Name hot selling types of vibrator fork level switch
Process connection Thread/flange/Cluck
Wetted Material SUS304, SUS316L, SUS spray coating PTEE
Process temperature Max 180 Deg C
Process pressure 220VAC 5A/24VDC 3A
Ambient Temp. -20°C~70°C
Insert depth customized
Top & Low Position Alarm HLFS(high-level alarm); LLFS(low-level alarm)
Explosion-proof ExdII CT6, ExdII BT4
HS code 9032899090
Typical Application of Vibration Fork Level Switch
For solid materials, the main measurement is free-flowing medium density solid powder or granules. For example, fly ash, cement, sand, stone powder, plastic particles, salt, sugar, etc.
For liquid materials, it mainly measures explosive and non-explosive dangerous liquids, corrosive liquids (acid, alkaline solutions, etc.), high-viscosity liquid water, acid, alkali, mud, paper pulp, dyes, oils, milk, alcohol, beverages, etc.
The tuning fork level switch is widely used, mainly for powders and small particles with a wide density range, such as the detection of the dust inlet and outlet pipe plugging, dust collector dust level measurement, plastic, rubber powder, flour, Limit measurement of various food crops, food, chemical products, etc.
For liquids of various properties: limit detection of various media such as slurry, viscous, easy to foam, corrosive, and so on. less
The vibration fork level switch has the characteristics of long service life, stable performance, safety and reliability, strong adaptability, no adjustment and no maintenance. Feejoy can manufacture vibration level switchs according to your requirements.
-
Temperature Transmitter
#wireless #thermocouple #temperature #transmitter
Best Quality Temperature Transmitter Manufacturer
The so-called temperature transmitter is a device that converts thermal resistance, thermocouple, resistance and millivolt... moreTemperature Transmitter
#wireless #thermocouple #temperature #transmitter
Best Quality Temperature Transmitter Manufacturer
The so-called temperature transmitter is a device that converts thermal resistance, thermocouple, resistance and millivolt signals into a standard two-wire system 4 ... 20mA and transmits the signal to the control room. Also named as the thermocouple temperature transmitter, It is generally used in industrial sites. When the range of the traditional temperature transmitter needs to be changed, it is generally adjusted by zeroing and adjusting two potentiometers, but these two potentiometers are the culprits that cause a large temperature drift of the product. Not only produce products, we also provide solutions to technical problems, even in the earliest stages of the project.
Development of Temperature Transmitter
With the advancement of science and technology, due to the tedious debugging of traditional analog temperature transmitters and poor comprehensive performance indicators, they can no longer meet the needs of on-site users, nor can they meet the requirements of factory spare parts, nor can they meet the needs of temperature sensor manufacturers’ demand.
Therefore, the intelligent transmitter was born. One of them is to use CUP in the product, digitize the signal, and install special software on the PC during debugging, and use the data cable and modem to change the range of the temperature transmitter. And the index number; the other is to embed the HART communication board in the intelligent product itself, and change the temperature range and index number of the temperature transmitter through the HART protocol hand-held manipulator; there are two types of PA protocol and FF protocol respectively The temperature transmitter is similar to the HART protocol. The application of HART, PA, and FF communication protocols is more convenient for product programming (no limit location), but it will increase the price of the product itself and bring a burden to the owner.
Traditional temperature transmitters, PC programming temperature transmitters and HART programming temperature transmitters are the choices of most factories. However, after these methods have been used on the site for many years, users often hear that the debugging is too cumbersome. It is impossible for every worker to be equipped with a PC, and even if there is a PC, it may not be used because the debugging software of each manufacturer is not uniform and is cumbersome; Many factories are not equipped with HART Communicator, transmitters often need to adjust the range is not very convenient. So is there a product that can change this situation?
Advantages of Temperature Transmitter
From the visit to the idea to the trial production, after nearly 30 months, the product finally passed the assessment of various indicators, especially the lightning protection and pulse train experiments are very good; it also meets the supporting needs of on-site users and temperature sensor manufacturers; Even the intelligent product is easy to operate. It only needs a screwdriver to change the range of the dial switch, and the temperature transmitter has been micro-innovated. less
Feejoy provides two types of temperature measuring instruments: temperature transducer and temperature transmitter. Explore cost-effective solution of level transmitter. Best quality is ensured.
-
Radar Level Transmitter
#guided #wave #radar #level #transmitter
The radar level transmitter adopts the microwave pulse measurement method, and can be normal in the industrial frequency band range, the beam energy is low, can be installed in various... moreRadar Level Transmitter
#guided #wave #radar #level #transmitter
The radar level transmitter adopts the microwave pulse measurement method, and can be normal in the industrial frequency band range, the beam energy is low, can be installed in various metal, non-metallic containers or pipelines, the liquid, slurry and granular material level Perform non-contact continuous measurement. It is suitable for occasions with large changes in dust, temperature and pressure, and the presence of inert gas and steam.
Advantages of Radar Level Transmitter
Today's high-frequency radars are generally radar level gauges that operate in the K-band (24-26 GHz).
The higher the radar's operating frequency, the shorter the electromagnetic wave wavelength. The easier it is to have better reflections on inclined solid surfaces The narrow beam width can effectively avoid obstacles, and the high frequency can also make the radar using a smaller antenna.
The FMCW FM continuous-wave microwave level meter transmits and receives signals at the same time, and more microwave signals are emitted at the same time.
The solid wave measurement can reduce the wave loss phenomenon in the measurement of high dust solid silo.
Therefore, the solid-state mid- and high-frequency FM radar can provide accurate and reliable measurements, and is also well used in media such as PP powder and PE powder in the chemical industry. However, due to technical limitations, there is currently no high-frequency radar level gauge that works above the K band.
Specification of Radar Level Transmitter
The specification can according to your requirement to do:
Product Name radar level sensor
Material Sus304/316
Type Meter
Application Fuel Level Sensor
Power supply 24VDC/220VAC
Output 4~20mA
Measuring Range 70m
Accuracy 3mm
Sensor type rod
Certificate ISO9001
Radar Level Transmitter Used in Some Large Solid Silos
Nowadays, what troubles users in the field of level measurement is the level measurement of some large solid silos, especially for silos that are filled with dust and disturbance within 50/100 meters. Related technical instruments such as capacitors or guided wave radar TDRs will be subjected to strong tensile loads when the material level drops during unloading, which may damage the instrument or pull down the roof of the silo.
Heavy hammers often have problems with buried hammers and require frequent maintenance, as do most other mechanical instruments. The high dust conditions may exceed the capabilities of the non-contact ultrasonic level measurement system. High-frequency FM radar technology is especially suitable for level measurement of this large solid silo. less
Guided wave radar GWR level transmitter is suitable for occasions with large changes in dust, temperature and pressure, and the presence of inert gas and steam. Feejoy can manufacture non contact radar level transmitter according to your requirements.
-
Pressure Transmitter
#explosion #proof #pressure #transmitter
Best Quality Pressure Transmitter Manufacturer
The pressure transmitter is a device that converts pressure into pneumatic signal or electric signal for control and remote transmission. It... morePressure Transmitter
#explosion #proof #pressure #transmitter
Best Quality Pressure Transmitter Manufacturer
The pressure transmitter is a device that converts pressure into pneumatic signal or electric signal for control and remote transmission. It can convert physical pressure parameters such as gas and liquid sensed by the load cell sensor into standard electrical signals (such as 4 ~ 20mADC, etc.) to supply secondary instruments such as indicating alarms, recorders, regulators for measurement and indication. And process regulation. Our engineering team uses current reliable sensing technology and lean production principles to manufacture economical pressure level transmitter products, which can even overcome the most trivial industrial application problems.
Application of Pressure Transmitter
Pressure transmitter is the most commonly used smart pressure sensor in industrial practice. The standard pressure transmitter is widely used in various industrial automatic control environments, including water conservancy and hydropower, railway transportation, intelligent buildings, production automatic control, aerospace, military industry, petrochemical, oil wells, power, ships, Machine tools, pipelines, and many other industries.
The industrial pressure transmitter can be divided into force (torque) balanced type, capacitive type, inductive type, strain type and frequency type according to different conversion principles. The following briefly introduces the principles, structure, Knowledge of use, maintenance, and calibration.
Working Principle of Pressure Transmitter
The electronic pressure transmitter is composed of a measuring diaphragm and electrodes on both sides of the insulating sheet to form a capacitor. When the pressure on both sides is inconsistent, the displacement of the measuring diaphragm is caused, and the displacement is proportional to the pressure difference, so the capacitance on both sides is unequal, through oscillation and demodulation. less
Feejoy provides different types of pressure transmitter and pressure transducer: Mini Pressure Transmitter, Standard Pressure Transmitter, Differential Pressure Transmitter, Submersible Pressure Transmitter, etc. Explore cost-effective solution of industri
-
Pneumatic Product
#level #gauge #and #level #transmitter
Best Quality Pneumatic Product Manufacturer
Pneumatic hammer is an advanced powder falling device commonly used at home and abroad. It has been improved many times and many new varieties have... morePneumatic Product
#level #gauge #and #level #transmitter
Best Quality Pneumatic Product Manufacturer
Pneumatic hammer is an advanced powder falling device commonly used at home and abroad. It has been improved many times and many new varieties have been derived. The pneumatic products are novel and unique. It is used to automatically prevent the adhesion, clogging and bridging of powder in the pipeline, hopper and silo transportation, and it will not cause operation and deformation on the wall of the equipment, glass, cement, pharmaceutical, plastic, fuel and other powder processing industries. We have a professional team to provide assistance in mechanical engineering, electrical engineering, product design and analysis.
Pneumatic Product Types
Pneumatic Air Hammer
The advantage of the pneumatic hammer is that its striking strength is adjusted by adjusting the air supply pressure.
Pneumatic Vibrator
The working part of the vibrator is a rod-shaped hollow cylinder.
Introduction to Pneumatic Hammer
In a state where compressed air (more than 3Kg / cm) is not introduced into the pneumatic hammer, the magnetic piston is tightly fixed to the base plate with strong magnetic force. When the three-way solenoid valve is energized, compressed air flows into the pneumatic hammer body, and the pressure in the body increases. When the magnetic force is greater than the magnetic force, the magnetic piston detaches from the base plate at high speed, resulting in a strong counterforce due to the reaction force of strong magnetic force. The magnetic piston falling at high speed hits the substrate, and its impact force is transmitted to the silo, and the attached dust is knocked down with a strong impact force. When the three-way solenoid valve stops energizing, the compressed air in the pneumatic hammer body is discharged through the three-way solenoid valve, so the magnetic piston is slowly raised by the return spring and then close to the substrate, which is restored to the original state by the magnetic force.
There is a strong magnetic magnet inside the hammer head. Before the action, the magnetic hammer head is closely attached to the magnetic substrate. When the three-way solenoid valve is energized and the intake pressure is greater than the applied magnetic force, the magnetic hammer head is separated from the substrate at high speed and impacts the bottom After the impact, the three-way solenoid valve is powered off, the gas in the pneumatic product is eliminated, and the hammer head is reset. The impact force of the pneumatic air hammer is transmitted to the wall of the pipe or the barrel so that the material can flow smoothly. Widely used in powder processing industries such as chemical, fertilizer, pesticide, cement, fuel, etc..
Manufacturing Materials for Pneumatic Vibrators
There are many manufacturing materials for pneumatic vibrators, including carbon steel, cast iron, aluminum alloy, bronze, stainless steel and extruded aluminum. For applications in special environments, such as the pharmaceutical industry, the housing can be made of aluminum or stainless steel. Its vibration frequency and vibration strength can be accurately controlled by adjusting the flow and compressed air pressure (stepless adjustment). Its main advantages and uses include:
1. Only compressed air is needed as a power source, and the gas consumption is small, which is safe and energy-saving. It is an ideal device for use in freezing or high temperature environments, and is suitable for wet, dry, dusty, or explosive environments.
2. Small size, few failures, easy installation and maintenance.
3. Stop or start quickly, suitable for manual or automatic system.
4. Vibration force, vibration frequency and amplitude can be adjusted at will during the movement.
5. A wide range of applications, suitable for fatigue testing of parts or structural parts; jitter and compaction of hoppers; linear and bowl feeders, sieves and strainers; shakers and mixing equipment
6. The service life of most types of pneumatic vibrators is relatively low. less
Feejoy provides two types of pneumatic products: pneumatic percussion hammer and pneumatic vibrator. Explore cost-effective solution of level transmitter. Best quality is ensured.
-
Mini Float Level Switch
#explosion #proof #transmitter
The Mini float level switch is a simple and easy-to-use liquid level control element. It has no complicated circuits and will not be disturbed. As long as the material is selected correctly, any... moreMini Float Level Switch
#explosion #proof #transmitter
The Mini float level switch is a simple and easy-to-use liquid level control element. It has no complicated circuits and will not be disturbed. As long as the material is selected correctly, any nature of liquid, pressure, and temperature can be used.
Features of Mini Float Level Switch
Lightweight, simple working principle, high reliability and low price.
More than 30 kinds of floats with different materials and specifications are available.
Provide PP, PVDF, NYLON, POLYSULFONE and other plastic materials that can be acid and alkali resistant.
Stainless steel material SUS 304/316 temperature resistance up to 200 ℃; pressure resistance up to 6MPa.
Side-mounted, top-mounted and bottom-mounted are available. The mouth size is M8 ~ M16, 1/8 "~ 1/2", PF / PT / BSP, etc.
The wire is wire or cable, and the material is PVC, XLPE, PTFE.
Special specifications can also be customized.
Specification of Mini Float Level Switch
We can manufacture according to customer's specification like below:
Product Name Mini Float Level Switch
Contact Capacity AC220V/1A;DC24V/0.5A
Working Pressure ≤3.0MPa
Output Signal SPST NO/NC
Working Temperature -20~130°C
Protection Grade IP68
Connection 3/8″PF (OEM is available)
Wire Length 500±10mm
Installation Method vertical installation
Explosion-proof No
Connection 3/8″PF (OEM is available)
Installation Method vertical installation
Application of Mini Float Level Switch
In the fields of sewage treatment water purification, refrigeration equipment, water coolers, drinking fountains, water boilers, dishwashers, household and commercial electric water heaters, chemical liquids, etc., the liquids in containers such as sealed containers, storage tanks, open containers, and pools are separately carried out, the signal is transmitted remotely, on-site indication, liquid level monitoring, the liquid level is controlled by controlling the start and stop of the pump or the switch of the valve, or the high and low liquid level alarm.
The float is close to or away from the switch point in the rod body under the action of liquid buoyancy. When the float is close to the switch point, the magnetic steel in the float is also close to the dry reed pipe in the rod body. The contacts of the dry reed pipe are closed under the action of the magnetic force. On the contrary, when the float is far away from the switch point, the magnetic steel in the float is also far away from the reed switch in the rod body, and the contacts of the reed switch are disconnected due to the loss of magnetic force.
Normally closed (N.C) when the liquid level rises, the reed switch does not conduct. less
The Mini float level switch with customization options has the characteristics of lightweight, high pressure resistance, simple working principle, high reliability and low price. Feejoy can manufacture mini float switches according to your requirements.
Loading ...
There are no more results to show.